Schallkapseln STL-Dateien zum Selberdrucken

Update: 12. Mai 2021

Ich habe hier ein paar selbst konstruierte Schallkapseln zum Runterladen und Selberdrucken bereitgestellt. Wenn Interesse besteht, kann ich auch andere Formen erstellen. Dies soll nur mal ein Beispiel sein, wie sie aussehen können.

Neu: weitere Schallkapseln für Märklin Krokodil, V3201 und Piko Vectron

WP 3D Thingviewer Lite need Javascript to work.
Please activate and reload the page.

Schallkapsel für Donau-Lautsprecher 11x15mm
Name / DownloadVorschaubild
Lautsprechertyp Donau 11×15 mm
Schallbox-11x30x7-Variant-3.stl

WP 3D Thingviewer Lite need Javascript to work.
Please activate and reload the page.


Schallbox-11x30x10-Variant-3.stl

WP 3D Thingviewer Lite need Javascript to work.
Please activate and reload the page.


Schallbox-11x23x7-Variant-6.stl

WP 3D Thingviewer Lite need Javascript to work.
Please activate and reload the page.


Schallbox-11x15x10.stl

WP 3D Thingviewer Lite need Javascript to work.
Please activate and reload the page.


Schallkapsel-37565.stl
für Märklin Krokodil

WP 3D Thingviewer Lite need Javascript to work.
Please activate and reload the page.

Schallkapsel Donau rund
25 mm Durchmesser
5 mm Höhe

WP 3D Thingviewer Lite need Javascript to work.
Please activate and reload the page.

Schallkapsel Donau rund
25mm Durchmesser
5 mm Höhe
mit stabilerer Innenstruktur

WP 3D Thingviewer Lite need Javascript to work.
Please activate and reload the page.

Schallkapsel Donau rund
20 mm Durchmesser
8 mm Höhe, z.B. für Piko Vectron

WP 3D Thingviewer Lite need Javascript to work.
Please activate and reload the page.


Schallkapsel Donau rund
22.8 mm Durchmesser
5 mm Höhe, z.B. für Märklin / Trix BR 64

WP 3D Thingviewer Lite need Javascript to work.
Please activate and reload the page.

Schallbox-duo-Donau
für V3201

WP 3D Thingviewer Lite need Javascript to work.
Please activate and reload the page.


Schallbox Donau
für Brawa E 73 / Bayerische EG 1

WP 3D Thingviewer Lite need Javascript to work.
Please activate and reload the page.

Lautsprechertyp Sambo 13x18mm
Schallbox-Sambo-22x15x10.stl

WP 3D Thingviewer Lite need Javascript to work.
Please activate and reload the page.


Please follow and like us:

13 Kommentare

  1. Hi, I’ve been experimenting with these and the sound is noticeably better than using a standard enclosure. Is it possible for you to modify Variant 3 and Variant 4 to give a curved bottom instead of a flat one and increase the overall height to 8mm?
    This would aid installation of decent sound in ‚N‘ gauge locos considerably as the could then be fitted into the roof area.
    Many thanks

  2. Hi Moritz,
    That’s great! A radius of 13mm on the bottom of the enclosure should allow for fitting with the speaker facing downwards.
    Would the print be easier if printed upside down?
    Colin

    1. Hello Colin,
      yes, I think, to print upside down would be better for printing.

      Which of the examples would You prefer? Schallbox-11x30x10-Variant-3.stl ?

      Moritz

        1. Hi Colin,
          I created two versions, I will show You tomorrow. But I have another question. Do you need the curve along the long side or along the short side?

          Maybe, You can post an image of the loco as an example.

          Morirz

          1. I’m planning to fit these in a number of locomotives Moritz. The shorter one the 11 x 23 version would fit everything I’m looking to do but the 11 x 30 version would fit into some of them.
            I’m using British outline Graham Farish models and have previously removed the circuit board and fitted the insulated speaker face down on the chassis, modifying the chassis to suit. The speakers I have used before have been fitted to basic enclosures. Your enclosures with a reflex chamber are much better.
            I look forward to trying a curved enclosure out in a locomotive.
            Cheers Colin

  3. Hi Moritz,
    That’s great!
    A 13mm radius on the bottom would make it easy to fit the enclosure in a loco roof with the speaker facing downwards.
    Cheers Colin

    1. Hi Colin,
      I understand, so You want to place it upside down. Then I have to redesign. See below my new versions. I thought, they should fit to the motor below 😉

      The design is made to print on the upper side (upside down) to have a clear, plane surface to glue the speaker on top.

      So, for You, I have to make the roof side convex instead of concave.

      Moritz

          1. Thanks,
            I’m looking forward to see your print and how it fits into Your loco.

            If You need other dimensions, no problem, just tell me.

            Cheers Moritz

Schreibe einen Kommentar zu admin Antworten abbrechen

Deine E-Mail-Adresse wird nicht veröffentlicht. Erforderliche Felder sind mit * markiert